SB Series

SB Series

Monobloc Hammer hydraulic breaker without tie rods.

9 Models for excavators with operating weight from 1100 to 30800 lb

  • MONOBLOC BODY WITHOUT TIE-RODS

The particular monobloc-body construction, gives the structure more resistance to the efforts of leverage at work. The breaker is manufactured in one piece and there are no tie rods.

  • N2 ENERGY SYSTEM

The hammer works with nitrogen inertial energy recovery. The gas gives much power to the machine and it also reduces stress on the arm of the excavator.

  • HIGH TIME CHARGE OF NITROGEN

In the past the hammers that work with gas energy recovery, requires frequent refills. With this new range, using special sealing rings on the floating support, we have increased by 300% the residence time of the gas.

  • INSONORIZED

The particular monobloc-body construction, associated to the closed casing box , and the insertion of sound-absorbing material, has allowed to reach a very low working-noise levels.

  • PRESSURE

The SB series accepts very high values of back-pressure and very large range of calibration of the required oil flow, in order to facilitate the installation.

  • VISIBILITY

The SB series, with their streamline shape, allow good visibility during the work and allow to operate close to walls.